Item No. 0370502

As Seen On TV Flex Shot White, 8oz

As Seen On TV Flex Shot White, 8oz


Availability: Usually ships in 1 to 3 business days


Fix holes, cracks and leaks without the need of a caulking gun. Flex Shot, a revolutionary product from As Seen On TV, is a super thick rubber sealant that works on any surface. With its convenient and easy-to-use applicator, Flex Shot comes out evenly for a perfect seal each time. Once applied, Flex Shot won’t crack or peel and is completely waterproof. No home repair kit is complete without Flex Shot.

Features & Benefits:

  • Caulks, bonds and seals virtually everything
  • No need for a caulking gun
  • Expands and contracts
  • Excellent for crafts and decorative items
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 24.23ms
  • bvseo-msg: HTTP status code of 404 was returned;
Height 10 inches
Width 1.75 inches
Depth 1.75 inches
Product Weight 8 oz
Unit Price $1.62 per OUNCE (on regular retail)
Available Online
Package Count 1
Depth 1.75
Width 1.75
Height 10
Product Weight 8
Product Weight UOM oz
Container Type Can
Color White
Indications Bonding and sealing virtually everything
Country of Manufacture United States
Ingredient Preference Made in the USA
All surfaces must be clean, dry and free from dirt, grease and oil, hold can at 45° angle, push against the nozzle side and apply the material into the joint or seam to obtain full contact between sealant and surfaces, if further tooling is required, complete within 5 minutes. Remove excess sealant immediately with a dry paper towel, sealant forms a tack free skin in 20 minutes. Length of full cure depends upon factors such as temperature and humidity, but sections up to 1/8 become rubbery solids in about 24 hours, after using, extend a small amount of material beyond the end of the nozzle. This will cure and form a seal for the remaining material. Pull out this cured plug when you are ready to use again.
Dimethylsiloxane, Silica, Methyltriacetoxysilane, Ethyltriacetoxysilane, Petroleum Distillates, Difluoroethane, Polydimethylsiloxane, Titanium Dioxide

Keep out of reach of children. Uncured sealant causes irritation on contact with skin and eyes. In case of contact with skin, wipe off with paper towels or cloth and wash with soap and water. In case of eye contact immediately flush with water for 15 minutes. Call a physician immediately. Use with adequate ventilation. Contents under pressure. Do not puncture or incinerate. Do not remove rubber plug. Do not store at temperatures above 120°f. Do not store in automobiles, in direct sunlight, or any area with temperatures above 120°f. Keep container away from heat, sparks and flame. See material safety data sheet. Contains flammable propellant.