Item No. 0339096

Photo of Brita Pitcher Replacement Filter, 5 filters

Brita Standard Replacement Filters for Pitchers and Dispensers - BPA Free - 5 Count

$35.99

Availability: Usually ships in 1 business day

Details

Keep tap water healthier and tasting better when you regularly change your Brita replacement filter. Made to fit all Brita pitchers and dispensers, this replacement filter reduces copper, mercury and cadmium impurities that can adversely affect your health over time, while cutting chlorine taste and odor to deliver great tasting water. Designed to leave no black flecks in your water and with no pre-soak required, the Brita filters are quick and easy to use. Change your Brita filters every 40 gallons or approximately 2 months for best performance. Start drinking healthier, great tasting water with Brita today.

  • BPA FREE: Enjoy 5 BPA free Brita Standard Replacement Filters made to fit all Brita pitchers and dispensers except Brita Stream pitchers. Height 5.31; Width 2.31; Length/Depth 2.31; Weight .13 pounds
  • CLEANER: Only Brita filters are certified to reduce contaminants in Brita Pitchers. Certified to reduce Copper, Mercury, and Cadmium. Contaminants reduced may not be in all users water.
  • GREAT TASTING: Brita filters reduce chlorine taste and odor found in tap water. Substances reduced may not be found in all users water.
  • EASY INSTALLATION: A pull top cap makes filter change quick and easy with no pre-soaking necessary in order to sip and enjoy great-tasting, filtered water in minutes.
  • REDUCE & SAVE: One water filter can replace up to 300 standard 16.9 ounce water bottles, keep you hydrated, save you money, and reduce plastic waste. Replace filter every 40 gallons, about every 2 months for the average household.
Reviews
Brita Standard Replacement Filters for Pitchers and Dispensers - BPA Free - 5 Count is rated 4.6 out of 5 by 712.
Rated 5 out of 5 by from Great I have tried two kinds of Brita filters: the one you put on the faucet and the pitcher. I couldn't use the faucet one anymore because the faucet wasn't sturdy enough. I tried the pitcher. It was wonderful. Until I started to get the carbon flakes with my second filter and the water tasted funny. I told Brita and they sent me a complementary advanced filter. It is great so far! No more carbon flakes in the water or the reservoir and the water tastes amazing! At first I was worried because the water came out a charcoal gray, but after dumping the first load, it was clear. I flushed it twice more just to be certain. I would recommend this pitcher.
Date published: 2015-01-28
Rated 1 out of 5 by from new & improved design = reduced effectiveness The new design is more convenient because of the easy to grasp top which makes it easier to change. the water flows much faster through the filter as well, which is nice from a convenience standpoint, but terrible from a water filtration standpoint. The result is water that tastes like slightly improved tap water. So I'll be returning these and I think I'll switch to a large tank filtration system with a mineralizer. Thanks Brita for being the catalyst in this change. Sorry I won't be one of your customers anymore. Bad design...
Date published: 2014-12-17
Rated 3 out of 5 by from Filters too well This filter is more convenient than the older ones in that you don't have to pre-soak for 15 minutes. We didn't notice the water was any better than the old filters but I think it must filter out too much chlorine as after a few weeks (and before it's time to replace the filter), the water starts turning green with algae in the bottom and the whole family gets diarrhea. We keep our filter at room temperature since most of our water is used in the electric kettle for making hot tea, so it is out on the light but not direct sunlight. We preferred the older style that didn't have this problem [This review was collected as part of a promotion.]
Date published: 2017-04-09
Rated 3 out of 5 by from persistant charcoal particiles After many fill-ups I am still seeing alot of charcoal particiles in the white bowl. Is the filter defective or should I expect this indefinitly?
Date published: 2013-02-05
Rated 1 out of 5 by from The new filter is awful. We have the large dispenser, and we purchased the new replacement filter and it pops out when water is on the top level. Luckily, we were able to find a 3-pack of the prior filter, so we'll be ok for a while. I hope we will be able to go back to the old filter because it works great.
Date published: 2015-01-07
Rated 1 out of 5 by from filter fail the design of the filter is flawed. it pops out of the filter holder of my pitcher with every use - therefore allowing unfiltered water to mix with filtered water every time, totally defeating the purpose of filtering my water. It needs to have some type of twist & lock design to hold it in place. I have owned a brita filter pitcher for as long as I can remember & this last filter design is making me seriously consider switching to a different pitcher & filter system. please tell me a new twist & lock design is already in the works - I can't believe this is happening only to me...
Date published: 2016-07-04
Rated 1 out of 5 by from Does not fit properly I have tried every way to fit this new filter to create a good seal and it will not work. Still leaks through so now part of the water is just tap water. Old filter worked fine and never leaked.
Date published: 2015-01-25
Rated 1 out of 5 by from Terrible I hope Brita is reading this. I started using the newly designed filter last week, while I appreciated the no-soaking convenience I am not sure it's working right. A lot of water didn't go through the filter. It leaks right down to the pitcher. What's the point?
Date published: 2015-08-11
  • y_2018, m_10, d_21, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_712
  • loc_en_US, sid_0339096, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_riteaid
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 45.61ms
  • REVIEWS, PRODUCT
Specs
Height 5.55 inches
Width 11.47 inches
Depth 2.32 inches
Product Weight 5 count
Unit Price $719.8 per 100 (on regular retail)
Available Online
Package Count 5
Extended Size 5 filters
Container Type bottle
Color White
Model 35516
Indications Replacement water filters that fit all Brita pitchers & dispensers
Country of Manufacture United States
Ingredient Preference BPA Free
Directions
Change your filter with just a few simple steps. Wash your hands before unwrapping the filter. Flush filter with cold water for 15 seconds. Insert filter into reservoir. Add cold tap water. Discard your first 3 pitchers of filter water, or use this water for plants. It is normal for carbon dust to appear in your first fillings. Fill up your pitcher and enjoy great tasting water. Replace the water filter every 40 gallons or 2 months. Substances reduced may not be in all users water.